Micro-head Spectral-interference Laser Displacement Meter

SI-F series

Catalogs View Catalog

Controller, with Display Unit SI-F1000V

SI-F1000V - Controller, with Display Unit

  • CE Marking

Specifications

Model

SI-F1000V

Separate type

SI-F1000/SI-FD500

Type

Built-in main controller type

No. of connectable spectrum units

2

Display

Minimum display unit

0.001 µm

Display range

±999.999 µm to ±9999.99 mm (7 settings selectable)

Display cycle

10 times/sec

Terminal block

Laser remote interlock input

Non-voltage or voltage input *1.*2

TIMING1 input

RESET1 input

Auto-zero1 input

Laser control input

Analog voltage output

±10 V x 2 outputs, Output impedance: 100 Ω*2

Analog current output

4 to 20 mA x 2 outputs, Maximum load resistance: 350 Ω*2

Alarm output

NPN open-collector output (N.C.)*2

General comparator output

NPN open-collector output *3*2

Expansion connector

TIMING2 input

Non-voltage or voltage input *1.*2

RESET input

Auto-zero input

Program switch input

Non-voltage input x 3 inputs*2

Alarm output

NPN open-collector output (N.C.)*2

Comparator/ binary output

Binary output

Measured value data output (21 bits) OUT selectable NPN open-collector output*2

Strobe output

NPN open-collector output *3*2

Binary selection output

Binary selection input

Non-voltage or voltage input *1.*2

RS-232C interface

Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)

USB interface

In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)

Ethernet interface

100BASE-TX/10BASE-T

Major functions

12 Out simultaneous measurementcalculation, average, filter, scaling measurement, measured value alarm, tolerance setting, auto-zero, data storage, light monitor, 8-program memory,interferometer mode, mask, connection of setting support software, etc.

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

One head connected: 0.6 A or less. Six heads connected: 1.5 A or less.

Environmental resistance

Ambient temperature

0 to +50 °C 32 to 122 °F*4

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 0.5 mm 0.02", 2 hours in each of the X, Y, and Z directions

Weight

Approx. 600 g

*1 (NPN model) The rating of non-voltage input: 1 V or less ON voltage, 0.6 mA or less OFF current. (PNP model) The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFFcurrent.
*2 • NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max.
• Non-voltage input rating: ON voltage: 1 V max., OFF current: 0.6 mA max.
• Part of the input/output circuit of the SI Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external
devices. For details, refer to "Precautions on wiring".
*3 The rating of the NPN open-collector: 50 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 0.5 V max.
*4 When two or more expansion controllers are connected, the ambient temperature is 0 to +40 °C 32 to 104 °F.

Other Models