Sensor Head Spot Type, Laser Class 3B LK-H023

LK-H023 - Sensor Head Spot Type, Laser Class 3B

Specifications

Model		LK-H023
Mounting mode		Diffuse reflective
Reference distance		20mm0.787"
Measuring range		±3 mm ±0.12"^*1
Light source	Type	Red semiconductor laser
	Wavelength	690nm
	Laser class	Class 3B
	Output	50mW
Spot diameter (at standard distance)		ø25 µm
Linearity		±0.02% of F.S. (F.S. = 6 mm 0.24")^*2
Repeatability		0.02 µm (0.01 µm)^*3
Sampling cycle		2.55, 5, 10, 20, 50, 100, 200, 500, 1,000 µs (selectable from 9 levels)
Temperature characteristics		0.01% of F.S./°C (F.S. = 6 mm 0.24")
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp or fluorescent lamp: 10,000 lux or less
	Ambient temperature	0 to +45 °C 32 to 113 °F^*4
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Material		Aluminum die-cast
Weight		Approx. 230 g (including the cable)
^1 For details on the measurement range, see page 1-12 (when the sampling cycle is between 2.55 and 10 µs). ^2 This value was taken when measuring a KEYENCE standard target (white diffuse object) in standard mode. ^3 These values were taken when measuring a KEYENCE standard target (white diffuse object) at a reference distance and with the number of averaging measurements set to 16, 384. The value in the parentheses is a typical e x ample when measured with 65, 536 averaging measurements. ^4 If the ambient usage temperature is 40 °C 104 °F or higher, the LK-H023/H028 must be used while attached to a metal plate.